Install brake guard plate, front (vehicles with 17-inch low brake)
- Install brake guard plate (2) .
- Replace screws (1).
Parts: Screws
- Insert screws (1) and tighten.TIGHTENING TORQUE SPECIFICATION
Brake guard plate at front swivel bearing M6x12 Replace screw. tightening torque 8 Nm
Follow-up work
- Refer to INSTALLING THE FRONT BRAKE DISCS .
- Refer to GREASE THE BRAKE PADS, BRAKE ANCHOR PLATE AND BRAKE CALIPER USING BRAKE PAD PASTE (17 INCH BRAKE) .
- Refer to INSTALLING FRONT BRAKE PADS (17 INCH BRAKE) .
- Refer to INSTALLING THE FRONT BRAKE PAD WEAR SENSOR (17 INCH BRAKE) .
- Refer to INSTALLING THE FRONT LEFT AND RIGHT WHEELS .
- Refer to COMMISSIONING/BEDDING IN (BRAKE) NEW BRAKE PADS AND BRAKE DISCS .