Installing the power electric windows of the front door

• Pilot the power electric windows (3) on the door and position it correctly.
• Tighten nuts (2).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Power electric windows to inner door panel
  M6	Tightening torque	9.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.
• Tighten nut (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Power electric windows to inner door panel
  M6	Tightening torque	9.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install plug (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING FRONT DOOR WINDOW GLASS .
• Refer to INSTALLING THE MODULE BRACKET ON THE FRONT DOOR .
• Refer to INSTALLING THE FRONT DOOR TRIM PANEL .
• Refer to ACTIVATING ELECTRICAL SYSTEM .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .
• Refer to ADJUSTING THE FRONT DOOR WINDOW GLASS .
• Refer to INSTALLING OUTER WINDOW CHANNEL STRIP .