For reusing: Removing the adhesive bead
- Clean the windshield in the area of the adhesive bead (1).CONSUMABLE SPECIFICATION
Cleaning agent R2 500 ml 83190417324 - After cleaning, allow to air out.TECHNICAL DATA SPECIFICATION
Air drying time after cleaning Window glass or painted panel without residual adhesive bead 5 min Body with adhesive bead 15 min - Remove adhesive bead (1) on the rear window just before the adhesion using standard tool (2).
Standard tool:
Pinchweld scraper set
Pinchweld scraper set
81 62 0 410 436
NOTE: TECHNICAL INFORMATION
Do not touch the adhesive bead after cutting or allow it to come into contact with cleaning agents. - Prepare pinchweld scraper (2) as pictured.
- Cut back adhesive bead (1) on rear window (3).TECHNICAL DATA SPECIFICATION
Residual height of the adhesive bead Residual height of the adhesive bead max. 1 mm