Removing the B-pillar trim panel

Preliminary work 

• Refer to REMOVING REAR SEAT BENCH .
• Refer to REMOVING ARMREST SIDE SECTION .
• Refer to REMOVING THE INNER DOOR SILL COVER STRIP .
• Refer to REMOVING THE SEAT BELT FINISHER STRIP .
• Refer to REMOVING REAR SIDE TRIM PANEL .

• Remove cover cap (1) and release screw (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unclip clips (2).
• Teed B-pillar trim panel (1) out of the lip of edge protection and guides (3) in arrow direction.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed the upper seat belt (2)  out of the B-pillar trim panel (1).

  Courtesy of BMW OF NORTH AMERICA, INC.