Installing the Bowden cable of the front hood locks

• Install the Bowden cable bracket (2)  together with the Bowden cables.
• Attach the Bowden cable (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the Bowden cable bracket (1)  into the body.
• Close the lid (2)  and engage with the retaining lugs (3)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING LEFT AND RIGHT HOOD LOCK .
• Refer to INSTALLING THE COVER ON THE LEFT AND RIGHT IN THE ENGINE COMPARTMENT AT THE TOP .
• Refer to INSTALLING THE COVER FOR CENTER ENGINE COMPARTMENT .
• Refer to INSTALLING THE FRONT HOOD SEAL .