Installing the trim strip in the front bumper trim
- Position the trim strip (1) on the front bumper panel (2) at the latch mechanism (arrows) and engage.
Follow-up work
- Refer to INSTALLING THE BUMPER COVER TRIM .
- Refer to INSTALLING FOG LIGHT SUPPORT .
- Refer to PARTIALLY INSTALLING THE BUMPER BRACKET .
- Refer to INSTALL BUMPER COVER, FRONT .
- Refer to PARTIALLY INSTALLING THE TEMPERATURE SENSOR .
- Refer to PARTIALLY INSTALLING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
- Refer to INSTALL CENTER RADIATOR GRILLE .
- Refer to INSTALLING THE COVER FOR CENTER ENGINE COMPARTMENT .
- Refer to INSTALLING THE FRONT HOOD SEAL .