Removing the steering column switch cluster (SZL)
WARNING:
Pyrotechnic components
.
Danger! Immobilization period-threatening injuries!
Danger! Immobilization period-threatening injuries!
- All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
- Replace any damaged part or ones that have been dropped.
- For additional information see: SAFETY REGULATIONS ON HANDLING AIRBAG SYSTEM COMPONENTS/GAS GENERATORS .
NOTE:
TECHNICAL INFORMATION
The steering wheel must be replaced if the airbag unit has been deployed.
Only on M Sport steering wheel: The horn plate (if it can be ordered separately) must be replaced if the airbag unit has been deployed.
For additional information see: PROCEDURE AFTER AIRBAG DEPLOYMENT AS RESULT OF AN ACCIDENT .
The steering wheel must be replaced if the airbag unit has been deployed.
Only on M Sport steering wheel: The horn plate (if it can be ordered separately) must be replaced if the airbag unit has been deployed.
For additional information see: PROCEDURE AFTER AIRBAG DEPLOYMENT AS RESULT OF AN ACCIDENT .
Preliminary work
- Refer to ADJUSTING THE STEERING COLUMN POSITION .
- Refer to DEACTIVATING THE 48 V ELECTRICAL SYSTEM .
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
- Refer to REMOVING AIRBAG UNIT .
- Refer to REMOVING THE SPORTS STEERING WHEEL .
- Refer to REMOVING STEERING COLUMN SHROUD UPPER SECTION .
- Refer to REMOVING STEERING COLUMN SHROUD LOWER SECTION .
- Loosen screws (1) .
- Remove the steering column switch cluster (SZL) (2)
.
- Unlock and disconnect plug connections (1) at the steering column switch cluster (SZL) (2) .