Adjusting the eccentric shaft to the minimum lift (cylinder head removed)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2024 BMW M340i xDrive, 2024 BMW M340i, 2023 BMW M340i xDrive, 2023 BMW M340i, and 2022 BMW M340i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- Adjust the eccentric shaft (3)
slowly to the minimum lift with the help of the servomotor using a standard Allen wrench (1)
with 4 mm
in arrow direction.
- Ensure that the marking (2)
on the eccentric shaft (3)
faces up.
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Adjust the eccentric shaft (3)
slowly to the minimum lift with the help of the servomotor using a standard Allen wrench (1)
with 4 mm
in arrow direction.
- Ensure that the marking (2)
on the eccentric shaft (3)
faces up.
Courtesy of BMW OF NORTH AMERICA, INC.
|