Installing the front section of the front wheel arch cover on the left and right

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2022 BMW M340i xDrive, 2022 BMW M340i, 2022 BMW 330i xDrive, 2022 BMW 330i, and 2022 BMW 330e xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform the steps on the left and right side.

Installing the front section of the front wheel arch cover

NOTE: To provide a better overview: Schematic diagram with partially hidden components.

Installing the front section of the front wheel arch cover (1).

Tighten screws (arrows).

TIGHTENING TORQUE SPECIFICATION

Wheel arch trim panel, front
Thermoplastic hexagon screw	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.