Secure the wiring harness for the EPS on the front axle support
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2022 BMW M340i xDrive, 2022 BMW M340i, 2022 BMW 330i xDrive, 2022 BMW 330i, and 2022 BMW 330e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- Position the wiring harness of the EPS (1) on the front subframe.
- Secure the holder (2).
 Courtesy of BMW OF NORTH AMERICA, INC.
|
NOTE:
TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.
- Version A:
Connect connectors (1) and (2) and lock.
- Version B:
Connect connectors (1) and (2) and lock.
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Position the wiring harness of the EPS (1) on the front subframe.
- Secure the holder (2).
 Courtesy of BMW OF NORTH AMERICA, INC.
|
NOTE:
TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.
- Version A:
Connect connectors (1) and (2) and lock.
- Version B:
Connect connectors (1) and (2) and lock.
 Courtesy of BMW OF NORTH AMERICA, INC.
|