Releasing the wishbone from the swivel bearing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2022 BMW M340i xDrive, 2022 BMW M340i, 2022 BMW 330i xDrive, 2022 BMW 330i, and 2022 BMW 330e xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Release nut (1). If necessary, counter support at the Torx socket.
Release wishbone (2) from swivel bearing (3).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
Otherwise, the rubber grommet can be damaged. The components must not be in contact.
Make sure the rubber grommet (3) on the bottom wishbone (1) does not get damaged by the swivel bearing (2).

Courtesy of BMW OF NORTH AMERICA, INC.