Install the holder of the positive battery cable
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2022 BMW M340i xDrive, 2022 BMW M340i, 2022 BMW 330i xDrive, 2022 BMW 330i, and 2022 BMW 330e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- Feed in bracket (2) of positive battery cable and position.
- Fasten cable (1) in clamps (arrows).CAUTION: Improper routing of the positive battery cable .
Risk of short circuits!- Route the positive battery cable without abrasions and do not trap.
- Feed in bracket (3) of positive battery cable and position.
- Tighten the screws (arrows).TIGHTENING TORQUE SPECIFICATION
Holder, positive battery cable to cylinder head cover 6X18 Tightening torque 6 Nm - Secure the positive battery cable (1) at the clamps (2).
- Feed in bracket (2) of positive battery cable and position.
- Fasten cable (1) in clamps (arrows).
- Version A (without mild hybrid technology): CAUTION: Improper routing of the positive battery cable .
Risk of short circuits!- Route the positive battery cable without abrasions and do not trap.
- Feed in bracket (5) of positive battery cable and position.
- Tighten screws (arrows).TIGHTENING TORQUE SPECIFICATION
Holder, positive battery cable to cylinder head cover 6X181 Tightening torque 6 Nm - Secure the positive battery cable (1) at the clamps (2).
- Secure the positive battery cable (3) at the clamps (4).
- Version B (with mild hybrid technology): CAUTION: Improper routing of the positive battery cable .
Risk of short circuits!- Route the positive battery cable without abrasions and do not trap.
- Feed in bracket (3) of positive battery cable and position.
- Tighten screws (arrows).TIGHTENING TORQUE SPECIFICATION
Holder, positive battery cable to cylinder head cover 6X18 Tightening torque 6 Nm - Secure the positive battery cable (1) at the clamps (2).