Check the gap dimension of the hood
NOTE:
TECHNICAL INFORMATION
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For additional information see: 41 00.. GAP DIMENSIONS FOR BODY
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For additional information see: 41 00.. GAP DIMENSIONS FOR BODY
Check
- Check gap dimensions between the hood and the side panels.
Desired state
- Gap dimension does not correspond to the secondary service information 41 00.. GAP DIMENSIONS FOR BODY
.
Result
» Gap dimension does not correspond to the secondary service information 41 00.. GAP DIMENSIONS FOR BODY .
Measure
- Adjust hood.