Remove Soft-close motor

Preliminary work 

• Refer to REMOVING THE ROLLER COVER FOR LUGGAGE COMPARTMENT .
• Refer to REMOVING LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to REMOVING THE FLAP IN THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
• Refer to REMOVING THE LEFT OR RIGHT LUGGAGE COMPARTMENT LAMP .
• Refer to REMOVING RIGHT BACKREST SIDE SECTION .
• Refer to REMOVING REAR ENTRANCE COVER STRIP .
• Refer to REMOVING RIGHT BOTTOM C-PILLAR TRIM PANEL (3RD ROW OF SEATS) .
• Refer to REMOVING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL (ALL EQUIPMENT VERSIONS) .
• Refer to REMOVING BATTERY COVER .

• Disconnect the connector (1).
• Lever out soft-close automatic (2) from the holders (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Detach counter support (1) at the trunk lid lock.
• Twist cable linkage (2) slightly and detach at trunk lid lock.
• Remove the Bowden cable (1), together with the soft-close motor, from the vehicle.

  Courtesy of BMW OF NORTH AMERICA, INC.