Adjust lock striker
Precondition
The screws on lock striker are loosened so far that the lock striker can still be shifted.
NOTE:
TECHNICAL INFORMATION
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For additional information see: 41 00.. GAP DIMENSIONS FOR BODY
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For additional information see: 41 00.. GAP DIMENSIONS FOR BODY
- Adjust the lock striker's height such that the door lock does not bump or rub against anything.
- Move lock striker sideways in order to adjust the gap dimension between the door and the adjoining body part.
- Tighten down screws (1).TIGHTENING TORQUES SPECIFICATION
Lock striker screw Tightening torque 21 Nm