Installing the trim on the side bumper panel

• Correctly position the trim (2) and engage at the detents (arrows).
• Mount the blind rivet (1) using the special tool 0 496 521 (00 2 230). 

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING FOG LIGHT SUPPORT .
• Refer to INSTALLING THE TRIM ON THE CENTER ORNAMENTAL GRILLE .
• Refer to INSTALLING FRONT BUMPER COVER .
• Refer to PARTIALLY INSTALLING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER ON THE LEFT AND RIGHT .
• Refer to PARTIALLY INSTALLING THE LEFT FRONT AND RIGHT WHEEL ARCH TRIM .
• Refer to INSTALLING FRONT ORNAMENTAL GRILLE .