Disassemble the front axle support

WARNING: Heavy component falling down or tipping .
Danger! Immobilization period-threatening injuries!

Before lowering or removing the front axle: Secure the engine in the installation position.
For additional information see: 11 00 670 SECURING ENGINE IN INSTALLATION POSITION. .

Partially releasing left and right crash levers

NOTE: The following step(s) must be performed if the listed component(s) is/are installed.

NOTE: Perform the steps on the right and left side.

Release nut (1) .
Remove the bolt (2) .

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the right and left side.
Loosen screws (1) .

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1) to (3) .

Fig 1: Front Axle Support Screws Loosening Sequence
Courtesy of BMW OF NORTH AMERICA, INC.