Removing the heat shield of the exhaust turbocharger for the cylinders 1 to 3

Precondition 

Intake filter housing removed

• Unlock the clamps (1).
• Feed out air duct (2) in the arrow direction and remove.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock lock (1).
• Let the lock (1) engage at the holder (arrow).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock the locks (1).
• Feed out and remove the clean air pipe (2) for cylinders 4 to 6.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Guide out and remove the heat shield (1) for the exhaust turbocharger (cylinders 1 to 3).

Courtesy of BMW OF NORTH AMERICA, INC.