Connect the bleeder unit for brake fluid (top up brake fluid)
NOTE:
RISK OF DAMAGE
Paint damage.
Mechanical or chemical action may lead to paint damage.
Paint damage.
Mechanical or chemical action may lead to paint damage.
- Cover up working area with specified covering material only.
NOTE:
TECHNICAL INFORMATION
Use only BMW-approved brake fluids; refer to the Fluid Capacities tab for the selected vehicle.
Use only BMW-approved brake fluids; refer to the Fluid Capacities tab for the selected vehicle.
- Connect the bleeder unit (1) to the brake fluid reservoir and turn on.
Observe the operating instructions of the corresponding equipment manufacturer.
- Check the brake fluid level and adjust to the maximum mark if necessary.
The tire pressure must not exceed 2 bar.