Installing front wheel arch trim

Check the clips (1) for damage and replace where required,

Courtesy of BMW OF NORTH AMERICA, INC.

Check
Check detents (1) for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result

» Detent (1) of the wheel arch trim is damaged,

Measure
Replace wheel arch trim.
Snap the wheel arch trim (1) into the locks (2) on the front side panel.

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in wheel arch trim (2) and engage on the clips (3).
Replace the blind rivets (1).
Parts: Blind rivet
Mount blind rivet (1) using the special tool 0 496 521 (00 2 230) .

Courtesy of BMW OF NORTH AMERICA, INC.