Remount auxiliary brake light

Preliminary work 

• Refer to REMOVING THE TRIM FOR THE TOP REAR WINDOW FRAME .
• Refer to REMOVING BOTH TRIM PIECES FOR THE SIDE REAR WINDOW FRAME .
• Refer to REMOVING REAR SPOILER .
• Refer to REMOVING THE LOWER PART OF THE REAR SPOILER .

• Release the screws (1) and remove the auxiliary brake light (2) in arrow direction.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fit the auxiliary brake light (1) in arrow direction and tighten the screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Auxiliary stop lamp
  screw	Tightening torque	3.0 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING LOWER PART OF REAR SPOILER .
• Refer to INSTALLING REAR SPOILER .
• Refer to MOUNTING BOTH TRIMS FOR THE REAR WINDOW FRAME ON THE SIDE .
• Refer to INSTALLING THE TRIM FOR THE TOP REAR WINDOW FRAME .