Apply the foil (bent) for the VIN
- Clean the surface in area (1) with cleaning agent R2 and allow to dry.
CONSUMABLE SPECIFICATION
| Cleaning agent R2 | 500 ml | 83190417324 |
- Detach the protective film beginning at an edge.
Tap the foil (1) only in the areas (2) .
- Position the foil (1)
with the line (2)
in the center above the VIN and press it on.
- Detach the backing film (1)
beginning on one side.
If applicable, rub air bubbles out toward the edge.