Supplying The New Parts Required
Precondition
- Vehicle is fixed on straightening bench.
NOTE:
TECHNICAL INFORMATION
- Observe the procedure for repair stage 3.
For additional information see: 41 00... Repair method for repair stage 3
- For the stripping and rebuilding operations, refer to the surrounding text in Aftersales Information Research. See the FRU number.
Preliminary work
Follow-up work
- Prepare the following new parts (see Electronic Parts Catalog [EPC]):
A-pillar, outer part (1)
Side frame, center (2)
Top windshield panel (3)
Inner A-pillar (4)
A-pillar molded part
Shaped part, A-pillar, bottom inner
NOTE: TECHNICAL INFORMATION
For additional information see: 41 00...
Overview of consumables in Electronic
Parts Catalog - Supply the following consumables:
| Material | Quantity |
|---|---|
| Adhesive K1 | 1 |
| Cleaning agent R1 | 1 |
| Cleaning agent R2 | 1 |
| Cavity protection wax remover | 1 |
| Sealing compound D1 | 1 |