Install The Outer Section Of The B-Pillar

NOTE: TECHNICAL INFORMATION
For the repair, only use approved spot welders.
For additional information see: 41 00... Workshop equipment

NOTE: TECHNICAL INFORMATION
For additional information see: 41 00...
Installation of cavity sealing (expanded)

Apply sealant D1 to the cavity sealing elements (1) .
CONSUMABLE SPECIFICATION

Sealant D1 (seam sealing) 310 ml 83425A547B4
Install the new part and reinforcement plates and weld in areas (2) and (3) as per the new part preparation.
Avoid excessive heat input at the cavity sealing elements (1) . Consumable

Courtesy of BMW OF NORTH AMERICA, INC.