Replacing the tail light on the trunk lid

• Connect and lock the connector (2)  and position the tail light correctly on the tailgate (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace screws (1)  .

  Parts:  Screws

• Tighten down screws (1)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Tail light at trunk lid
  Oval-head screw M5x14 Replace screws.	Tightening torque	5.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE WATER CHANNEL ON THE TAIL LIGHT .
• Refer to INSTALLING THE TAILGATE TRIM PANEL .
• Refer to INSTALLING THE POWER TAILGATE SWITCH .
• Refer to INSTALLING TRUNK COMPARTMENT LIGHT ON TRUNK LID .