Installing the windshield rubber frame
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform the steps on the left and right side.
- Note mark (A) for windshield rubber frame (1).NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
- Move lever (1) in the arrow direction and open with the special tool 0 496 529 (51 3 320). NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
- Detach protective film (2) in stages from adhesive tape.
- Insert cover (1) into guides (3).NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
- Place special tool with pressure rollers (1) on the window edge.
- Align cover at outer edge of windshield.
- Fit the cover and visually check for perfect position.NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
- Move lever (1) in the arrow direction to close the special tool.
- Ensure that cover (3) is positioned correctly in guide pulleys (2).NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
- Continue to detach protective film (1) in stages from adhesive tape.
- Use the handwheel to draw special tool in arrow direction over the entire upper edge of the window glass.