Adjust lock striker

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

Precondition

The screws on lock striker are loosened so far that the lock striker can still be shifted.

NOTE: TECHNICAL INFORMATION
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For additional information see: 41 00... GAP DIMENSIONS FOR BODY

Adjust the height of the lock striker so that the door lock does not bump or drag.
Move lock striker sideways in order to adjust the gap dimensions between door and rear quarter panel.

Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATIONS

Lock striker
screw	Tightening torque	21 Nm
screw	Tightening torque	21 Nm