Installing the fog light bracket on the left and right

Installing fog light support

NOTE: Description is for left component only. Procedure on the right side is identical.

Tighten down screw (1) .
TIGHTENING TORQUE SPECIFICATIONS

Guide to the side on fog light holder

3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.
Engage fog light support (2) to the latch mechanism (arrows).
Mount the expanding rivets (1) .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING BUMPER COVER, FRONT .
Refer to INSTALLING FRONT SECTION OF THE FRONT WHEEL ARCH COVER (PARTIALLY REMOVED) .
Refer to INSTALLING FRONT ORNAMENTAL GRILLE .