Installing the pedal mechanism

• Install pedal mechanism (1).
• Replace the screw (2).

  Parts:  Screw

• Tighten down screw (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Replace nuts (3).

  Parts:  Nuts

• Tighten nuts (3).

• Engage the brake pedal (1) in the arrow direction with the brake booster.

Courtesy of BMW OF NORTH AMERICA, INC.

• Make sure that the bolt of the brake booster

(2) engages with the holder of the brake pedal (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE CLUTCH MASTER CYLINDER .
• Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
• Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .