Installing the convertible top compartment lid mechanism

• Position the convertible top compartment lid mechanism (1) on the previously made mark.
• Tighten down screws (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the cable linkage for the emergency unlocking (1) in the cargo area.
• Connect connectors (2) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check that the retaining clips (1) on the hydraulic cylinder (2) are fitted correctly.
• Clip on the hydraulic cylinder (2) on the associated ball hub.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE CONVERTIBLE TOP COMPARTMENT LID .
• Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON RIGHT .
• Refer to INSTALLING THE TOP LUGGAGE COMPARTMENT TRIM PANEL .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .