Supplying The New Parts Required

Precondition 

• Tail panel is removed.

  Vehicle is fixed on straightening bench.

  NOTE: TECHNICAL INFORMATION 

  • Observe the procedure for repair stage 3.

    For additional information see: 41 00... Repair method for repair stage 3

  • For information about stripping and rebuilding operations, refer to the surrounding text in the AIR. See the FRU number.

Preliminary work 

Follow-up work 

• Prepare the following new parts (see Electronic Parts Catalog [EPC]):

  Rear luggage compartment floor (1)

  Panel of rear bumper (2)

  Side member extension at rear top (3)

  Luggage compartment floor, side section (4)

  Side member extension at rear bottom (5) reinforce., side member (6)

  Luggage compartment well, right (7)

  Luggage compartment well (8)

  Luggage compartment well, left (9)

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  For additional information see: 41 00... Overview of consumables in Electronic Parts Catalog
• Supply the following consumables:

  Material	Quantity
  Adhesive K5 (50 ml)	1
  Blind rivet N3	20
  Punch rivet N4	5
  Coarse thread bolt	25
  Threaded weld bolt	5
  EMC screw	3
  Cleaning agent R1	1
  Cleaning agent R2	1
  Sealing compound D1	1
  Cavity protection wax remover