Prepare New Part

Perform the separating cuts on the new part according to the separating cuts on the vehicle.
NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Welding in reinforcement plates (sheet steel)
At the separating cuts, prepare reinforcement plates (1).
Adjust the new part and reinforcement plates (1) and, in areas (2) and (3), prepare for joining by welding.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Spot-weld bonding steel components
In area (3), follow the procedure for replacing spot-welded adhesive joints for standard production.