Installing the brake light

NOTE: RISK OF DAMAGE
Penetration of moisture through sealing residues of the 3rd brake light.
Moisture damage in the luggage compartment.

NOTE: TECHNICAL INFORMATION
The 3rd brake light is fitted with a double-sided adhesive seal and must therefore be replaced.

3. Brake light must be replaced.
Part: 3. Brake lamp
Remove protective film from seal (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Connect the plug (1) with the 3rd brake light (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the brake light (1) on the tailgate.
Lock the locks (2).

Courtesy of BMW OF NORTH AMERICA, INC.