Tightening the screw connection of the control link on the wheel carrier
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2022 BMW M340i xDrive, 2022 BMW M340i, 2022 BMW 330i xDrive, 2022 BMW 330i, and 2022 BMW 330e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
Tighten the screw connection in the NORMAL POSITION .
Tighten the screw connection in the NORMAL POSITION .
- Slacken screw (1) by one turn.
- Tighten the screw (1) with the standard tool.
Standard tool: Ring insert tool for double hexagon head
Ring insertion tool for external double hexagon
Ring insertion tool for external double hexagon
TIGHTENING TORQUE SPECIFICATIONTrack arm to wheel carrier M12 Replace screw. Joining torque 100 Nm Tighten in normal position. Angle of rotation 90°