Remove wiring harness

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2022 BMW M340i xDrive, 2022 BMW M340i, 2022 BMW 330i xDrive, 2022 BMW 330i, and 2022 BMW 330e xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The following step(s) must be performed if the listed component(s) is/are installed.

Disconnect the plug connection for the vibration actuator.
Loosen screws (1).
Loosen grounding cable (2) from steering wheel.
Remove vibration actuator (3).
Loosen screws (1).
Loosen grounding cable (2) from steering wheel.
Remove the balance weight (3) if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock plug connection (1) and disconnect.
Unlock and disconnect the plug connection (2) if necessary.
Loosen and remove wiring harness (3) from steering wheel.

Courtesy of BMW OF NORTH AMERICA, INC.