Installing the bracket for the electric coolant pump on the component carrier
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2022 BMW M340i xDrive, 2022 BMW M340i, 2022 BMW 330i xDrive, 2022 BMW 330i, and 2022 BMW 330e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- Feed in and position the holder (2) of the electric coolant pump.
- Tighten down screws (1).TIGHTENING TORQUE SPECIFICATION
Electric coolant pump holder on component carrier M6X20 tightening torque 8 Nm - Tighten down screw (1).TIGHTENING TORQUE SPECIFICATION
Electric coolant pump holder on component carrier M6X20 tightening torque 8 Nm