Attach the control unit holder

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2022 BMW M340i xDrive, 2022 BMW M340i, 2022 BMW 330i xDrive, 2022 BMW 330i, and 2022 BMW 330e xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Make sure that the control unit bracket (1) is inserted below correctly into the mount (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Correctly position the control unit bracket together with the control units (2).

Tighten down screws (1).

TIGHTENING TORQUE SPECIFICATION

Control unit bracket at the shock tower
Hexagon screw	tightening torque	8 Nm

Feed in and install the cover (1) in the guides.

Courtesy of BMW OF NORTH AMERICA, INC.

Courtesy of BMW OF NORTH AMERICA, INC.