Adding the coolant level and checking the coolant composition
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2022 BMW M340i xDrive, 2022 BMW M340i, 2022 BMW 330i xDrive, 2022 BMW 330i, and 2022 BMW 330e xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- Park vehicle on a horizontal surface.
- Stop engine.
- Visual inspection of the engine compartment for traces of coolant.
- Check the coolant composition in all the coolant expansion tanks.
Consumable
Technically suitable antifreeze and anti-corrosion agents
NOTE:
TECHNICAL INFORMATION
The test conditions must be observed.
The test conditions must be observed.
- Check the coolant level in all the coolant expansion tanks.TECHNICAL DATA DESCRIPTION
Test conditions for coolant level Coolant must be cooled down - The coolant level in all expansion tanks must be overfilled above the maximum mark for a separate charge.TECHNICAL DATA DESCRIPTION
Coolant level Overfill quantity of coolant (above the maximum mark) in the high-temperature expansion tank
+ 200 ml
Overfill quantity of coolant (above the maximum mark) in the low-temperature expansion tank (if installed)
+ 100 ml