Installing the rear brake pad wear sensor

• Install brake pad wear sensor (2)  in the brake pad in the arrow direction and ensure that it fits correctly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Hook the cable of the brake pad wear sensor into the holder (1)  .

  If the holder (1)  is not available, then the holder (1)  must be installed later!

  Courtesy of BMW OF NORTH AMERICA, INC.

• Hook the cable of the brake pad wear sensor into the holder (1)  .
• Connect and lock the connector and close the cover (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to MOUNTING THE REAR RIGHT WHEEL .