Removing front brake hose (high brake)
Prerequisite
- Vehicles with brake high.
WARNING:
Vehicle may slip off the vehicle hoist if the vehicle hoist is handled incorrectly
.
Danger! Immobilization period-threatening injuries!
Danger! Immobilization period-threatening injuries!
- Observe safety instructions on raising the vehicle using a vehicle hoist.
- For additional information see: RAISING THE VEHICLE WITH A VEHICLE LIFT .
NOTE:
TECHNICAL INFORMATION
Use only BMW-approved brake fluids.
Use only BMW-approved brake fluids.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING THE FRONT LEFT WHEEL .
- Refer to INSTALLING BRAKE PEDAL TENSIONER .
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Release union screw (1)
.
Hold on to square shaft, if necessary (2) .
- Detach brake hose (1)
from brake caliper.
If necessary, grip at knurling (2) .
- If necessary, detach the brake hose from holder (3) .