66 31 010 Instructions for ACC adjustment device (330i, 330i xDrive, 330e PHEV, 330e xDrive PHEV, M340i and M340i xDrive)

Courtesy of BMW OF NORTH AMERICA, INC.

Requirements for the measurement area for ACC adjustment device 

Dimensions: 

1. Area behind the mirror of at least 80 cm that can be entered

   The distance (1) between the front radar sensor/front radar sensor long range and mirror that is required for the correct setting

   can be found in the vehicle-specific service function.

2. Total area of work area 360 cm x 660 cm

Maximum irregularity of floor surface: 

• Floor surface - adjustment device ≤ 1 mm
• Floor surface - vehicle ≤ 10 mm

Courtesy of BMW OF NORTH AMERICA, INC.

Maximum angle of inclination of floor surface - vehicle: 

• Downward incline of floor surface maximum 3°, see graphic above (1)
• Upward incline of floor surface maximum 1°, see graphic above (2)

Detailed setup and operating instructions are enclosed with every ACC adjustment device  .