(Attaching the front left wheel)

Mounting the wheel 

• Remove dirt, grease residues and corrosion from the contact surface with a drill and the special tool 2 344 011 

  Do not operate special tool 2 344 011  with an impact screwdriver

  Courtesy of BMW OF NORTH AMERICA, INC.

• De-grease the contact surfaces with the universal cleaner (see the appropriate BMW parts catalogue)
• In the event of grease residues in the area of the wheel bolt holes, remove and clean the brake disk
• Remove dirt, grease residues and corrosion from the contact surface with a drill and the special tool 2 344 011 

  Do not operate special tool 2 344 011  with an impact screwdriver

• De-grease the contact surfaces with the universal cleaner (see the appropriate BMW parts catalogue)

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check if the mounting bolt (1) has been fitted correctly for the brake disk

  The mounting bolt (1) for the brake disk cannot  protrude on the contact surface (2) between the brake disk and the rim

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  Do not  grease the wheel hubs and wheel centering in models G80, G82 and G83
• Lightly grease the wheel centering (1) in the rim
  (CONSUMABLE SPECIFICATIONS)
  
  

  Brake block paste  * TU = Trade Unit. TU numbers cannot be ordered! For invoicing purposes only	3 g, Bag	83192158851
  	100 g, Tube	83192158852
  	5 g, TU*	83230140233

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  Do not  grease the wheel hubs and wheel centering in models G80, G82 and G83
• Apply a thin layer of grease to the front and rear wheel hubs (1) to protect against corrosion
  (CONSUMABLE SPECIFICATIONS)
  
  

  Brake block paste  * TU = Trade Unit. TU numbers cannot be ordered! For invoicing purposes only	3 g, Bag	83192158851
  	100 g, Tube	83192158852
  	5 g, TU*	83230140233

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  A wheel lifter is recommended for easier wheel removal and installation without exertion.
• In vehicles with M Carbon ceramic brake: The wheel lifter must be used to install the wheel 

  This process is intended to prevent damage to the brake disc

Courtesy of BMW OF NORTH AMERICA, INC.

Check 

• Check lug bolts for wear 

  Courtesy of BMW OF NORTH AMERICA, INC.

  Result 

  » Spots (> 30%) of the bearing surface (1) of the taper on the screw head show silvery wear

  Measure

  • Replace lug bolts
  NOTE: TECHNICAL INFORMATION 
  Never use an impact screwdriver or electric screwdriver to apply and tighten the lug bolts
  The rim must rest evenly against the brake disc
  In the case of non-original BMW lug bolts/wheel rims, it may be necessary to retighten the lug bolts on user account of setting properties (refer to the documentation from the manufacturer)
  Do not apply oil to new lug bolts

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the corroded lug bolts (arrows)

  Parts:  Lug bolts

• Clean wheel bolts (arrows)
• Check lug bolts (arrows) and threads for damage, replace lug bolts (arrows) if necessary
• Join and tighten the lug bolts (arrows)