Flush the rear brake and air bleed
NOTE:
Description is for right component only. The procedure on the left side is identical
- Work through the instructions in the service function in sequence
- Begin with the flushing at the right rear
- Connect the vent hose with the collecting vessel to the bleed valve (1) on rear right brake caliper
- Open the bleed valve (1) and purge it until clear, bubble-free brake fluid emerges
- Close bleed valve
TIGHTENING TORQUE SPECIFICATION
| Rear bleed valve | ||
| Bleed valve | tightening torque | 10 Nm |
- Carry out the same procedure on the rear left wheel brake