51 64 FRONT PANEL, FRONT END (M3 base, M3 Competition, M3 Competition M xDrive, M3 CS)
5164 TIGHTENING TORQUE OVERVIEW
| Adapter to the front panel | ||
| Oval-head screw with spring washer | Tightening torque | 4.6 Nm |
| Cross connection, top | ||
| M6x20 | Tightening torque | 11.8 Nm |
| Cross connection at the top to rear cross connection | ||
| M8x20 screw | Tightening torque | 28 Nm |
| Cross connection at the top to the lock support | ||
| Oval-head screw | Tightening torque | 28 Nm |
| Front-end strut to upper rear connection | ||
| M10x35 screw Replace screw |
Tightening torque | 56 Nm |
| Angle of rotation | 90° | |
| Holder to support | ||
| M6x20 | Tightening torque | 8 Nm |
| Rear cross connection at the top of the hood latch support | ||
| Flat-head screw M6x20 | tightening torque | 11.8 Nm |
| Rear top cross connection to wheel arch carrier support | ||
| M10x20 screw Replace screw |
Joining torque | 56 Nm |
| Angle of rotation | 90° | |
| Reinforcement strut to front subframe | ||
| M10x40 hexagon screw | Tightening torque | 56 Nm |
| Reinforcement strut to rear cross connection | ||
| Hexagon screw M10x35 | Tightening torque | 56 Nm |