Installing the headlining (lowered)

• Install the end support of the sun visors (1) in the headlining and mount it with clamps (2)

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check the clips (1) on the headlining (2) for damage and replace, if necessary

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the headlining (1) with the help of an support person on the respective edge protection
• Position and clip in the headlining (2) at the clips (1)

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the clips (2) on the headlining (1)

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE COVERS FOR THE INTERIOR MIRRORS .
• Refer to INSTALLING ROOF FUNCTION CENTER (FZD) .
• Refer to INSTALLING THE HANDS-FREE MICROPHONE .
• Refer to INSTALLING FRONT VANITY MIRROR LIGHT .
• Refer to INSTALLING THE COUNTER SUPPORT FOR THE SUN VISOR .
• Refer to INSTALLING THE SUN VISOR .
• Refer to INSTALLING A-PILLAR TRIM PANEL .
• Refer to INSTALLING B-PILLAR TRIM PANEL .
• Refer to INSTALLING THE HOLDER ON LEFT OR RIGHT .
• Refer to INSTALLING INTERIOR ROOF LIGHT .
• Refer to INSTALLING C-PILLAR TRIM PANEL .
• Refer to TRIM OF THE 3RD INSTALLING THE BRAKE LIGHT .