Replacing the damaged roof clip on the CFRP roof

Overview of possible clip positions

Courtesy of BMW OF NORTH AMERICA, INC.

Do not remove the damaged clips (1) at the roof frame

Courtesy of BMW OF NORTH AMERICA, INC.
Remove any roof adhesive and sealant from the bonding surface (1)
Clean the bonding surface (1) on the roof outer skin
CONSUMABLE SPECIFICATION

Cleaning agent R2 500 ml 83190417324
Coat the bonding surface (1) on the roof outer skin
ADHESIVE SPECIFICATION

Activator - 205 250 ml, Bottle 83190030155

Courtesy of BMW OF NORTH AMERICA, INC.

Let the bonding surface (1) on the roof outer skin air out

TECHNICAL DATA SPECIFICATION

Air drying time after the order
Activator - 205		2 min

Clean the bonding surface on the clip (2)
CONSUMABLE SPECIFICATION

Cleaning agent R2 500 ml 83190417324
Affix double-sided adhesive tape (1) to the clip (2)
Cut the double-sided adhesive tape (1) to the correct dimensions
Pull protective film off adhesive tapes

Courtesy of BMW OF NORTH AMERICA, INC.
Position the clip (1) in the roof duct
The spacers (2) must be flush on the CFRP roof outer skin first
Affix clip (1) with firm thumb pressure
The roof trim strip can be mounted after 4 h

Courtesy of BMW OF NORTH AMERICA, INC.