Installing the trim panel for the dashboard

• Insert the dashboard trim in the vehicle and position it at the support
• Insert the associated wiring harnesses and connect the connectors
• Tighten down screws (1)

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUES SPECIFICATION
  
  

  Dashboard to support
  screw	Tightening torque	2.4 Nm

• Connect the connector (1) to the light operating unit and lock it

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach the wiring harness (2) to the holders
• Connect connectors (1) and lock

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (1)
  TIGHTENING TORQUES SPECIFICATION
  
  

  Dashboard to support
  screw	Tightening torque	2.4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Open glovebox
• Tighten down screws (1)
  TIGHTENING TORQUES SPECIFICATION
  
  

  Dashboard to support
  screw	Tightening torque	2.4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1) on the underside of the glove box
  TIGHTENING TORQUES SPECIFICATION
  
  

  Dashboard to support
  screw	Tightening torque	2.4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect all plug connections and cable clips (arrows) behind the glove compartment

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (1)
  TIGHTENING TORQUES SPECIFICATION
  
  

  Dashboard to support
  screw	Tightening torque	2.4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (1)
  TIGHTENING TORQUES SPECIFICATION
  
  

  Dashboard to support
  screw	Tightening torque	2.4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Perform the steps on the right and left side
• Tighten down screw (2)
  TIGHTENING TORQUES SPECIFICATION
  
  

  Dashboard to support
  screw	Tightening torque	2.4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Use sound insulation (1)

Follow-up work 

• Refer to INSTALLING THE SPEAKER HOLDER ON THE DASHBOARD .
• Refer to INSTALLING THE SPEAKER TRIM AT THE DASHBOARD .
• Refer to INSTALLING AUDIO CONTROL UNIT .
• Refer to INSTALLING THE INSTRUMENT CLUSTER (KOMBI) .
• Refer to INSTALLING THE STEERING COLUMN SWITCH CLUSTER (SZL) .
• Refer to INSTALLING STEERING COLUMN SHROUD LOWER SECTION .
• Refer to FITTING STEERING COLUMN SHROUD UPPER SECTION .
• Refer to INSTALLING THE STEERING WHEEL/M SPORT STEERING WHEEL .
• Refer to INSTALLING THE AIRBAG UNIT (M SPORT STEERING WHEEL) .
• Refer to INSTALLING THE CENTRAL INFORMATION DISPLAY (CID) .
• Refer to INSTALLING THE DECORATIVE STRIP ON THE RIGHT DASHBOARD .
• Refer to INSTALLING THE DECORATIVE STRIP ON THE DASHBOARD ON THE LEFT .
• Refer to INSTALLING RIGHT FOOTWELL TRIM .
• Refer to INSTALLING FOLD-OUT COMPARTMENT ON THE LEFT .
• Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
• Refer to INSTALLING A-PILLAR TRIM PANEL, LEFT AND RIGHT .
• Refer to INSTALLING THE SIDE PANEL ON LEFT DASHBOARD .
• Refer to INSTALLING THE SIDE PANEL ON DASHBOARD ON THE RIGHT .
• Refer to INSTALLING THE CENTER CONSOLE .
• Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
• Refer to INSTALLING THE STORAGE COMPARTMENT IN THE FRONT CENTER CONSOLE .
• Refer to INSTALLING THE OPERATING FACILITY IN THE CENTER CONSOLE .
• Refer to INSTALLING THE WIRELESS CHARGING STORAGE .
• Refer to INSTALLING THE DECORATIVE TRIM ON THE LEFT AND RIGHT OF THE CENTER CONSOLE .
• Refer to INSTALLING THE CENTER CONSOLE TRIM .
• Refer to INSTALLING TRIM IN STORAGE COMPARTMENT OF CENTER ARMREST .
• Refer to INSTALLING THE CUP HOLDER .