Lower the headlining on the left or right (with sliding/tilting sunroof)
NOTE:
RISK OF DAMAGE
Fold the headlining
Bending of the headlining can result in the need for the headlining to be replaced
Fold the headlining
Bending of the headlining can result in the need for the headlining to be replaced
- Carry out tasks with a second person to assist
- Support the headlining at the front and back
Preliminary work
- Refer to TRIM OF THE 3RD BRAKE LIGHT .
- Refer to REMOVING C-PILLAR TRIM PANEL .
- Refer to REMOVING INTERIOR ROOF LIGHT .
- Refer to INSTALLING THE HOLDER ON LEFT OR RIGHT .
- Refer to REMOVING THE B-PILLAR TRIM PANEL .
- Refer to REMOVING THE A-PILLAR TRIM PANEL .
- Refer to REMOVING SUN VISOR .
- Refer to REMOVING THE COUNTER SUPPORT FOR THE SUN VISOR .
- Refer to REMOVING THE FRONT VANITY MIRROR LIGHT .
- Refer to REMOVING THE HANDS-FREE MICROPHONE .
- Refer to REMOVING THE ROOF FUNCTION CENTER (FZD) .
- Refer to REMOVING THE COVERS FOR THE INTERIOR REARVIEW MIRROR .
NOTE:
RISK OF DAMAGE
Fold the headlining
Bending of the headlining can result in the need for the headlining to be replaced
Fold the headlining
Bending of the headlining can result in the need for the headlining to be replaced
- Carry out tasks with a second person to assist
- Support the headlining at the front and back
- Unclip the headlining (1) at the clips (2) downwards
- Loosen screw (1)
- Unclip the headlining at the clips (2) downwards
- Unclip the headlining (1) from the sliding/tilting sunroof case and the clamps (2) in the area of the dotted lineNOTE: Schematic diagram is for example purposes. Some parts may differ in certain details
- Guide out the headlining at the respective edge protection
- Lower the headlining and place it onto the head restraints as shown