Installing starter motor

Precondition 

Acoustic cover of the oil pan has been removed.

• Insert and install the starter motor (2).
• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Starter motor to crankcase
  M8x60	Tightening torque	19 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install the starter motor (2).
• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Starter motor to engine
  M8X60	tightening torque	19 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUES SPECIFICATION
  
  

  Starter motor to crankcase
  M8x60	Tightening torque	19 Nm