Supplying the new parts required
- Prepare the following new parts (see applicable BMW parts catalogue):
A-pillar, outer (1)
2 x door sill reinforcement plate (2)
NOTE: TECHNICAL INFORMATION
For additional information see: OVERVIEW OF CONSUMABLES (APPLICABLE BMW WORKSHOP EQUIPMENT) . - Supply the following consumables:
| Material | Quantity |
|---|---|
| Coarse thread bolt | 5 |
| Sealing compound D2 |
- Prepare the following new parts (see applicable BMW parts catalogue
):
Rear luggage compartment floor (1)
Rear bumper bracket (2)
Extension piece of top side member (3)
Boot floor (4)
Extension piece of bottom side member (5)
Luggage compartment well, left (6)
Luggage compartment well (7)
Luggage compartment well, right (8)
NOTE: TECHNICAL INFORMATION
For additional information see: OVERVIEW OF CONSUMABLES (APPLICABLE BMW WORKSHOP EQUIPMENT) . - Supply the following consumables:
| Material | Quantity |
|---|---|
| Adhesive K5 (50 ml) | 1 |
| Blind rivet N3 | 15 |
| Punch rivet N4 | 4 |
| Coarse thread bolt | 25 |
| Threaded weld bolt | 5 |
| EMC screw | 3 |
| Cleaning agent R1 | 1 |
| Cleaning agent R2 | 1 |
| Sealing compound D2 | 1 |
| Cavity protection wax remover |
- Prepare the following new parts (see applicable BMW parts catalogue
):
Outer A-pillar (1)
Reinforcement plate, door sill (2)
NOTE: TECHNICAL INFORMATION
For additional information see: OVERVIEW OF CONSUMABLES (APPLICABLE BMW WORKSHOP EQUIPMENT) . - Supply the following consumables:
| Material | Quantity |
|---|---|
| Adhesive K5 (50ml) | 1 |
| Cleaning agent R1 | 1 |
| Cleaning agent R2 | 1 |
| Coarse thread bolt | 5 |
| Sealing compound D2 | 1 |